top of page
Search

Updates to Mr.CAD PRO-10

Writer: migueRami
migueRami
14 hours ago
14 min read
Mr.CAD Professional 10 (UPG)
Buy Now

CHANGE LIST:

🆕 = Featured

IMPORTANT : These improvements and/or fixes can only be obtained through the automatic update system .

Grades:

  • This directly affects IntelliCAD CMS : If the open drawing is in very large coordinates, this can cause errors due to limitations in the "Get Intersections" command provided by IntelliCAD. It is recommended to move the project to smaller coordinates. Affected commands: All those related to obtaining surface data.

  • When drawing lines with the geometry by list command, if you choose to type the layer name on the keyboard, it does not draw the line.


Sep-8-26

Sep-2-26

Aug-27-26

Aug-26-26

  • Improvements :

    • Mr.CAD 360 - Updated.See the list of improvements by clicking this link.

    • Since there were countless blocks in the AutoCAD 2000 library, these drawings were updated to AutoCAD 2004. They are now compatible with scaling using the IntelliCAD CMS properties window. This change means the program cannot be used with any version of AutoCAD older than 2004, such as version 2000.

  • Corrections :

    • Other minor corrections.

Jul-28-26

Jul-01-26

Jun-03-26

May 26, 2026

  • Improvements :

  • Corrections :

    • The surface scan command was not working properly in CMS IntelliCAD.

    • The GVOL command was failing when preparing the volume calculation in CMS IntelliCAD.

    • Other minor corrections.

May-07-26

  • Improvements :

  • Corrections :

    • When editing the text style of the measurement table title in the settings program, the width was not being applied.

    • Other minor corrections.

Apr-27-26

  • Improvements :

  • Corrections :

    • Other minor corrections.

Apr-23-26

  • Improvements :

  • Corrections :

    • The scale report has been removed from the bottom bar of CMS IntelliCAD. Due to a bug in the program, it would stop working after opening and closing a couple of drawings.

    • The following layers were added: Stations, Bench Mark and LotPoints to improve compatibility with Mr.CAD 360.

    • The command: Contour Stamp now inserts the elevation tag into the correct layer .

    • Other minor corrections.

Apr-14-26

Mar-14-26

  • Improvements :

  • Corrections :

    • Now, when importing points with Mr.CAD 360, if a point number (ID) is greater than 2147483647, it is automatically changed to 0. There cannot be point numbers greater than 2147483647.

    • Other minor corrections.

Mar-12-26

Mar-06-26

Jan-27-26

Jan-24-26

Jan-22-26

  • Improvements :

    • None.

  • Corrections :

    • Applying the Isolate Layer command as a group to a point was turning off the layer of the point's nodes. Therefore, further adjustments were made to the point layers.

    • Other minor corrections.

Jan-14-26

  • Improvements :

    • None.

  • Corrections :

    • Further adjustments to the point layers.

    • When trying to create the measurement table, an error related to the layers occurred.

    • When attempting to rotate the points using the platform tools, the error message "Malformed list" appeared and the command was cancelled.

    • Other minor corrections.

Jan-09-26

Dec-30-25

Dec-29-25

Nov-13-25

  • Improvements :

  • Corrections :

    • When drawing lines with the geometry by list command, if you choose to type the layer name on the keyboard, it does not create the line.

    • Other minor corrections.

Nov-04-25

  • Improvements :

  • Corrections :

    • The attexplode (attribute explode) command was not working.

    • Other minor corrections.

Oct-25-25

Aug-26-25

  • Improvements :

    • The Activation button icon in Mr.CAD Loader was changed for better distinction.

    • The LINE-DIAG command was updated to work the same as the PLOT-LINE command (the command to create lines with auto-dimension, in bearings).

    • The documentation was updated.

    • Mr.CAD 360 - Updated.See the list of improvements.

  • Corrections :

    • A message about an error in layers that appeared when creating a measurement table was removed.

    • Other minor corrections.

Aug-22-25

  • Improvements :

    • A button was added to the Mr.CAD Loader to make activation easier.

    • The documentation was updated.

    • Mr.CAD 360 - Updated.See the list of improvements.

  • Corrections :

    • Other minor corrections.

Aug-19-25

Aug-15-25

  • Improvements :

  • Corrections :

    • If, when configuring the drawing, it did not have a viewport, the configuration would stop.

    • Other minor corrections.

Aug-13-25

  • Improvements :

  • Corrections :

    • The command to create lines with auto dimension, in bearings, is canceled in the second round.

    • Other minor corrections.

Aug-06-25

  • Improvements :

  • Corrections :

    • The command to turn the data points on and off stopped working with the change to the new way of importing points from the 360.

    • Other minor corrections.

Jul-16-25

  • Improvements :

    • Mr.CAD 360 - Updated.See the list of improvements.

    • 🆕Importing points using Mr.CAD 360 is now super fast. The method has been changed to import using a DXF file.

    • 🆕In CMS intelliCAD 11.1 PE, a window is now displayed to choose whether the user wants to use the traditional menus (Toolbars) or the new Mr.CAD Tools floating toolbar.

    • In CMS intelliCAD 11.1 PE, you can now use the DVTOOLBARS command. This command allows you to switch between the Toolbars and the Mr.CAD Tools floating toolbar.

  • Corrections :

    • Other minor corrections.

Jul-11-25

Jul-09-25

  • Improvements :

    • Updated help.

    • 🆕In CMS intelliCAD 13.1 PE, you can now use the DVTOOLBARS command. This command allows you to switch between the Toolbars and the Mr.CAD Tools floating toolbar.

    • Mr.CAD 360 - Updated.See the list of improvements.

  • Corrections :

    • Other minor corrections.

Jul-07-25

  • Improvements :

    • In CMS intelliCAD 13.1 PE, a window is now displayed to choose whether the user wants to use the traditional menus (Toolbars) or the new Mr.CAD Tools floating toolbar.

    • Mr.CAD 360 - Updated.See the list of improvements.

  • Corrections :

    • Other minor corrections.

Jul-02-25

Jun-11-25

Jun-6-25

  • Improvements :

  • Corrections :

    • The earthwork calculation command was simplified to the earthwork performed with Mr.CAD 360. This is much faster and more accurate.

    • Other minor corrections.

Jun-4-25

Jun-2-25

  • Improvements :

  • Corrections :

    • CMS IntelliCAD - When converting text elevations to elevation points, if the selection exceeded 500 entities, the command was canceled and the program refused to continue with any other command.

    • CMS IntelliCAD - When calculating volume, if the selection exceeded 500 entities, the command was canceled and the program would not continue with any other command.

    • Other minor corrections.

May 28, 2025

  • Improvements :

  • Corrections :

    • CMS IntelliCAD - Fixed an issue that caused the create profiles command to not work.

    • Other minor corrections.

May 13, 2025

  • Improvements :

  • Corrections :

    • CMS IntelliCAD - Cross sections are canceled if the value of the SELECTIONCYCLING variable is different from 1.

    • Other minor corrections.

Apr-24-25

Apr-23-25

Apr-17-25

  • Improvements :

    • Compatibility with AutoCAD 2026.

  • Corrections :

    • Other minor corrections.

Apr-15-25

  • Improvements :

    • Mr.CAD 360 - Updated.See the list of improvements.

    • Measurement table in IntelliCAD: Under some conditions, existing points on the perimeter were not being detected.

  • Corrections :

    • Other minor corrections.

Apr-9-25

  • Improvements :

    • Mr.CAD 360 - Updated.See the list of improvements.

    • Commands related to area converted to Ropes and Tasks were not working properly in some versions of CMS IntelliCAD PE

  • Corrections :

    • Other minor corrections.

Apr-3-25

  • Improvements :

    • Mr.CAD 360 - Updated.See the list of improvements.

    • The documentation was updated.

    • The horizontal lines that divide each data field in the tables are now on a separate layer. This allows you to turn off that layer if you don't want to print those lines.

  • Corrections :

    • Other minor corrections.

Mar-31-25

  • Improvements :

  • Corrections :

    • Area conversion adjustment for the Dominican Republic: Tasks

    • Other minor corrections.

Mar-24-25

  • Improvements :

    • None.

  • Corrections :

    • External commands stopped working.

    • Other minor corrections.

Mar-21-25

  • Improvements :

    • Mr.CAD 360 - Updated.See the list of improvements.

    • An option was added to Mr.CAD Tools to control which tools open when the cursor hovers over the icon.

  • Corrections :

    • When trying to close the IntelliCAD PE CMS when there were no drawings open, it caused the program to not close.

    • When creating the measurement table, if there were two points very close to each other, the point was repeated in the table.

    • Other minor corrections.

Mar-13-25

Feb-27-25

  • Improvements :

  • Corrections :

    • Other minor corrections.

Feb-4-25

  • Improvements :

  • Corrections :

    • The abbreviation command in CMSIntelliCAD 13.1 was not working.

    • Other minor corrections.

Jan-31-25

  • Improvements :

  • Corrections :

    • Several commands in CMSIntelliCAD 13.1 were not working.

    • Other minor corrections.

Jan-21-25

Jan-14-25

  • Improvements :

  • Corrections :

    • Other minor corrections.

Jan-10-25

  • Corrections :

    • Mr.CAD Loader stopped working. The only button that worked was the one to close the program. The problem was caused by the image. Note : If you don't use Mr.CAD Loader, don't worry about this update.

    • Other minor corrections.

Jan-9-25

  • Improvements :


  • Corrections :

    • IMPORTANT : Mr.CAD 360 - Updated.See the list of fixes.

    • There was a change in Microsoft's antivirus software that affected the execution of Mr.CAD Loader, causing it to stop working. If you installed the previous version ( 10.10.108.214) , to allow Mr.CAD Updater to access the new update, you can open a drawing by double-clicking on it. Alternatively, you can open Mr.CAD 360 Combo. This should load Mr.CAD Updater, and it should then begin downloading the update with the fixes.

    • Other minor corrections.

Jan-8-25

Dec-27-24

  • Improvements :

  • Corrections :

    • Other minor corrections.

Dec-21-24

  • Improvements :

  • Corrections :

    • In some versions of AutoCAD, Mr.CAD tools was not loading automatically.

    • Other minor corrections.

Oct-17-24

  • Improvements :


  • Corrections :

    • A problem was solved when creating windows on the floor plan; when there were more than one (3), they were created incorrectly, and the identification tag was in the wrong layer.

    • Other minor corrections.

Oct-16-24

  • Improvements :

    • 🆕Everything that was missing from the architecture was integrated into the IntelliCAD CMS.

  • Corrections :

    • When inserting the points, in the point list window, when editing the point group, the box for the adjustment value in the XYZ was not accepting decimal values.

    • A conflicting setting in the text height configuration for dimensions was resolved. This setting was repeated in both the general settings and the text styles settings, causing a conflict. It was removed from the dimensions area and placed within the text styles settings.

    • Other minor corrections.

Oct-14-24

Oct-12-24

  • Improvements :

    • The following symbols were added:

      • Electricity

      • Lamps

      • Communication systems

      • Toilets

      • Many more need to be added, and that's what we're working on.

  • Corrections :

    • Many internal fixes for compatibility with the IntelliCAD CMS. Related to Architecture.

    • Other minor corrections.


Oct-10-24

  • Improvements :

  • Corrections :

    • In the last update, some files were left out and some things didn't work.

    • The windows in elevation were not drawing completely.

    • The menu was not updating.

    • Other minor corrections.


Oct-03-24

  • Improvements :

    • IntelliCAD CMS:

      • 🆕Part of the architecture is working.

      • The symbols for doors and windows in elevation were added.

    • Mr.CAD 360 - Updated.See the list of improvements.

  • Corrections :

    • Other minor corrections.

Sep-03-24

  • Improvements :

    • 🆕Compatibility with the new CMS IntelliCAD 13.0 (BETA)

    • General settings : Now suggests updating styles or layers only if changes have been made to those settings.

  • Corrections :

    • General settings: It displayed an error before applying the changes.

    • Other minor corrections.

Sep-01-24

  • Corrections :

    • IntelliCAD CMS:

      Dimensions toolbar: Some functions were not working.

    • Mr.CAD Loader with CMS IntelliCAD: By using the Configure IntelliCAD option, the menus are now recompiled so that the latest version can be used.

    • Other minor corrections.

Aug-17-24

  • Corrections :

    • IntelliCAD CMS:

      Point Manager : When editing the point numbering, it was not processed correctly.

    • Other minor corrections.

Aug-16-24

  • Corrections :

    • IntelliCAD CMS:

      • The following were not working: The command to stamp the curve data, and the command to make the arc table.

    • Profiles : Horizontal and vertical scales had a decimal point. This was removed.

    • QIMPORT : If, when importing points, the user requests to see the list, the points are inserted with several 000s in the point number. For example, 0001, 0002, 0003, etc.

    • QIMPORT/Point Manager : When removing points from the list, it was not processed correctly.

    • Other minor corrections.


Aug-12-24

  • Corrections :

    • IntelliCAD CMS:

      • The recent changes affected the command to create the survey table. Thanks to those who submitted reports, it's now fixed with this update.

    • Other minor corrections.


Aug-08-24

  • Improvements :

    • CMS IntelliCAD PE+ 12.1x64:

      • 🆕You can now create: Cross-sections

      • 🆕You can now label stations in a polyline and create the vertex table.

      Mr.CAD 360 - Updated.See the list of improvements.

  • Corrections :

    • IntelliCAD CMS:

      • The commands to switch UCS and create and restore views were not working correctly. This fix activates several commands that were previously not working. Among those that now work are the commands to create cross-sections and the commands for stationing and vertex tables of a polyline.

    • Other minor corrections.


Aug-08-24

  • Improvements :

  • Corrections :

    • IntelliCAD CMS:

      • A problem that prevented adding a parked position to a polyline

    • Other minor corrections.


Aug-30-24

  • Improvements :

  • Corrections :

    • IntelliCAD CMS:

      • When using the survey table, if there was no existing point at a vertex, it was always inserting point #1.

    • Other minor corrections.


July 24, 2024

June 10, 2024

  • Improvements :

  • Corrections :

    • IntelliCAD CMS:

      • When using the survey table, it was not detecting existing points and was inserting duplicates.

    • Other minor corrections.


May 23-24

  • Improvements :

    • 🆕Line table: The option to create a line table has been added to the create tables command. This option reports the total length of the route at the end (instead of the area).

    • Mr.CAD 360 - Updated.See the list of improvements.

    • CMS IntelliCAD: The Annotations and Legends Toolpalette has been added.

  • Corrections :

    • Other minor corrections.


May 21-24

May 16, 2024

  • Improvements :

  • Corrections :

    • A bug was introduced that prevented the import of points using MrCAD 360.

    • In CMS IntelliCAD, the button to create pivot areas and parallel areas was invoking the sections command.

    • When configuring the IntelliCAD CMS, IntelliCAD did not close naturally.

    • When configuring the IntelliCAD CMS, the tool palettes remained blank.

    • Other minor corrections.

April 27, 2024

  • Improvements :

    • Mr.CAD 360 - Updated.See the list of improvements.

    • 🆕New dialog box that sums most individual entries. Getting results is now much faster. Now available in CMS IntelliCAD 12.1

  • Corrections :

    • In field data, when the method used is north-oriented data, when trying to edit a data point, the program did not allow it.

    • Other minor corrections.

April 25, 2024

  • Improvements :

    • Mr.CAD 360 - Updated.See the list of improvements.

    • 🆕 Compatible with AutoCAD 2025

    • Greater compatibility with the IntelliCAD 12.1 CMS

    • 🆕New dialog box that aggregates most of the individual entries. Now it's much faster to get the results.

    • Updated help.

    • Some icons have been revised.

  • Corrections :

    • When updating Mr.CAD Professional in CMS IntelliCAD, upon first login, the menus are automatically recompiled to display the recent changes.

    • An important fix that affects the use of Mr.CAD 360.See the list of improvements.

    • Other minor corrections.

March 27, 2024

  • Improvements :

  • Corrections :

    • When importing points using Quick import, it was reactivating the command upon completion.

    • The automatic update system is working.

    • Other minor corrections.

March-06-24

  • Improvements :

  • Corrections :

    • The excessive and unnecessary amount of window reminders for activation were removed.

    • The automatic update system was not working.

    • Other minor corrections.

02-16-24

  • Improvements :

  • Corrections :

    • The version number was revised so that during installation, it is not reported that the existing version is higher than the one being installed.

    • In some systems where the user has changed the size of the icons and text, the background image that should have been shifted did not look right.

    • Other minor corrections.

Feb-08-24

  • Improvements :

    • 🆕Integration with AutoCAD installations where the executable is autocad.exe

    • Mr.CAD 360 - Updated.See the list of improvements.

    • Improved appearance and description of icons on the Desktop and Windows Menu.

    • The icons for Mr.CAD PRO Loader and Mr.CAD PRO Tools are better identified.

    • Updated installation help.

  • Corrections :

    • Other minor corrections.

Feb-07-24

  • Improvements :

  • Corrections :

    • Other minor corrections.

Feb-02-24

  • Improvements :

    • Tool to disable version 9

    • 🆕 New activation system via internet server.

    • 🆕 New automatic update system.

    • Re-compiled executables using the latest technology.

    • 🆕 Connecting to the new IntelliCAD 12.0 CMS

    • Mr.CAD 360 - Updated.See the list of improvements.

    • Updated help.

  • Corrections :

    • Other minor corrections.



 
 
 

Comments

Rated 0 out of 5 stars.
No ratings yet
Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page