24/7 online technical support: Open an account on this portal ingeomatics.com and become a member. Visit the frequently asked questions section and see if your question has already been answered. See if the solution to the problem has been posted in the Groups . Watch the educational videos . Advantages: Free Hours: 24/7 Basic requirement: Open an account. Technical support via email: Visit the frequently asked questions section and see if your question has already been answered. See if the solution to the problem has been posted in the Groups . Watch the educational videos . Fill out the error report sheet explaining the nature of the problem. Advantages: Free Schedule: You can send your message 24/7, and it will be answered during Puerto Rico business hours. Basic requirement: Open an account. Remote assistance via screen sharing and/or phone calls: This service incurs a small fee per session. Anyone with a current technical support plan has several sessions of this service covered and free of charge. Each time you use this service, an event is deducted from your plan's allowance. Once you reach the number of events covered by your plan, you will automatically be charged for any additional sessions. Schedule available in the booking calendar. Basic requirements for the session: You can download the UltraViewer program by clicking the button above. When the download is finished, it opens (runs) it and calls me, and provides me with the Identification number and the password provided by the Viewer window. Have a good internet connection, fast enough to use the UltraViewer program (more than 100mb/s). The problem or question must be directly related to the use of Mr.CAD . Problems related to programs other than Mr. CAD should be handled by you, using the manufacturer's recommendations. Have basic knowledge of how to work with AutoCAD® and Windows® . Do not answer phone calls while receiving service . These calls are distracting, disrupt learning, and reduce available time. It is recommended that you make arrangements so that calls do not interfere with the service. Who has to pay for the session? The one who does not have an active aid plan. The one who has the active aid plan and has consumed the number of sessions allowed by the plan. Who does NOT have to pay for the session? The one who has the active aid plan and has not consumed the number of sessions allowed by the plan. How can I find out how many sessions are allowed on my plan? See the plans and benefits here: https://www.ingeomatics.com/planesmantenimiento Which products include the technical support plan? Mr.CAD Professional 10 - For the first year, the Professional Plan. It can be renewed . Mr.CAD 360-P - For the first year, the Professional Plan. It can be renewed . Mr.CAD 360-1Y - for the life of the license, the Professional Plan. If you don't have an active Technical Support Plan , purchase one by clicking on: https://www.ingeomatics.com/plansmantenimiento To upgrade, you can click on the following link:

Ventana inicial Some known problems: DXFOUT : Layers with long names do not open in AutoCAD 2004, but they do open in modern versions of AutoCAD. LIST OF RECENT CHANGES: 🆕 = Featured Sep-8-26: Improvements : (BETA) Working on improving the surfarea command. Corrections : Center-aligned text was not printing correctly when clearing the background was not excluded. Other minor corrections. Sep-4-26: Improvements : (BETA) Working on improving the surfarea command. Corrections : When drawing a dimension and zooming in, a ghost dimension appears. The text wipeout is not occurring in accordance with the size of the paragraph or text. Some text styles (fonts) did not match the printed result on paper. Other minor corrections. Sep-2-26: Improvements : (BETA) Working on improving the surfarea command. Block library updated for compatibility. Corrections : Other minor corrections. Aug-27-26: Improvements : (BETA) Working on improving the surfarea command. 🆕Integration with the new CMS IntelliCAD 15.0 PE Corrections : Other minor corrections. Aug-22-26: Improvements : (BETA) Working on improving the surfarea command. 🆕The ability to change the decimal precision for the depth label was added to the volume calculation. Corrections : Other minor corrections. Aug-14-26: Improvements : Now the DXF and DWG appear with the view focused on the same place (ZOOM) when opened in other CAD programs. Corrections : Other minor corrections. Jul-29-26: Improvements : When exploding a block with attributes, it now asks if you want to convert the attributes to text or preserve the attribute entity. Several conditions related to the trim command in polylines were improved. Corrections : Paragraphs with Bottom-Right justification print lower than intended. When printing long tables with the option to split them, if the option to remove the background content from the text is enabled, a larger area than required was cleaned. The "home" command in dimensions was not fixing the text orientation in dimensions of the angular type. When scaling blocks with the symbolic option enabled, the block does not enlarge. It should be possible to enlarge it by double-clicking and changing the scale values in x, y, and z. Other minor corrections. Jul-01-26: Improvements : (BETA) Working on improving the surfarea command. It is now included in the Ribbons, and also has the option to select the surface and draw the result in the drawing. To improve the quality of technical support, the error reporting window now allows you to see the Mr.CAD 360 version in the window title. Corrections : In the srvlines command, the dialog option with @ does not allow the Repeat option to be turned on. Other minor corrections. Jun-23-26: Improvements : (BETA) Working on new command surfarea , computes the surface area of the active surface. GISmap now uses the Spanish language according to the 360 configuration. GISmap now includes a location search function to make finding the appropriate map easier. Corrections : When exploding a paragraph, under certain conditions it could report an error. When exploding a sentence or text, under certain conditions the text was not correctly positioned. Other minor corrections. Jun-03-26: Improvements : GISmap now accepts plot points, benchmarks, and stations. And it accepts the elevations of those points. 🆕GISmap now includes the complete list of states and developed countries. When using it, you will need to re-specify the country code. Corrections : When creating shapefiles with GISmap, files were generated for each feature. Now, only three shapefiles are generated: the line file, the polyline file, and the point file. Other minor corrections. May 26, 2026: Improvements : None Corrections : When opening a drawing saved in paperspace, moving the cursor over the entities would highlight the incorrect entity. Other minor corrections. May-07-26: Improvements : None Corrections : When editing a viewport using grips , osnaps were not being applied. When saving a drawing, sometimes the first option shown was to save as mrT (Template) instead of mrD (Drawing). When importing a DXF or DWG, if an arc was created in a UCS other than WORLD, it was created in incorrect coordinates. When exporting to a DWG file, to the file with supplementary instructions in LSP , I was not inserting the images into CMS IntelliCAD. Volume - When sending the calculation to AutoCAD, the m^3 symbol appears incorrectly. It was changed to the unabbreviated word. Other minor corrections. Apr-23-26: Improvements : None Corrections : Support for the reaConverter 7 had been discontinued. Other minor corrections. Apr-22-26: Improvements : None Corrections : During the update process, sometimes an error message appeared saying "Please close "ElecKey Agent..." and the installation could not be continued. Upon updating, the menu and settings were reset to their initial values. Any modifications and preferences were lost. The GIS Map was not working on Mr.CAD 360 P Other minor corrections. Apr-20-26: Improvements : None Corrections : The Windows character and language system is now detected, and recommendations for correcting problems are provided. Other minor corrections. Apr-14-26: Improvements : None Corrections : The detection of the existence of a folder was causing an error message when opening some files with images. Other minor corrections. Apr-9-26: Improvements : The explode command can now explode a sentence into individual words. The DocViewer now has a Next button. This allows you to switch to the next document of the same class. Double-clicking on a dimension now displays 3 options, and one of them opens the dimension's properties. Corrections : Some fonts were causing errors at the start of the program. The degree symbol was causing errors on some PCs. Other minor corrections. Mar-14-26: Improvements : None Corrections : Now, if a point number (ID) is greater than 2147483647, it is automatically changed to 0. There cannot be point numbers greater than 2147483647. Other minor corrections. Mar-12-26: Improvements : None Corrections : When editing a line with the grips, it reversed the direction. Importing a point file containing the layer caused an error. Other minor corrections. Mar-10-26: Improvements : None Corrections : When entering bearings and distances with the dialog box in loop mode, upon moving to the next input, it changes the angle to East. Now the box clears and displays nothing. When editing a line with grips while the angle and distance labels were active, the position of the labels was not being updated when the editing was finished. Other minor corrections. Mar-06-26: Improvements : None Corrections : When saving the drawing, a " Path not found " error was reported. Drawing entities with osnap turned on in combination with angle and distance tags turned on caused the " osnap preview " to not be displayed. The use of ASCII code 176 (degree symbol) was changed to the direct use of the ° symbol. The purpose is to improve compatibility with different devices that could not display ASCII code 176 . Other minor corrections. Mar-04-26: Improvements : 🆕The Bearings field now accepts periods (.) or dashes (-) as separators. Example of accepted angles: @25 Corrections : The HW line type was displayed very large when exporting to DWG or DXF. Drawings from previous versions were saved without a name in the layout. In this update, a new feature was added: if a drawing is saved in an unnamed layout, the program automatically assigns a name such as Layout_1 , 2, 3, 4, ... Other minor corrections. Feb-27-26: Improvements : 🆕When exporting a DXF or DWG file, an LSP file is now created with the same name as the exported drawing. When you open the exported drawing in a standard CAD program capable of running LSP files (appload), functions are executed to complete the details missing from the DWG or DXF: such as creating viewports , inserting images , loading linetypes , and updating dimensions and text . Corrections : Other minor corrections. Feb-25-26: Improvements : 🆕When exporting a DXF or DWG, an LSP is now created that can fill in missing details such as creating viewports, updating dimensions and text. Corrections : When switching to model space, if something was selected, an error was reported. Other minor corrections. Feb-19-26: Improvements : A significant improvement in the import of dot files created with Eastern instruments. Those using the UTF-8-BOM format. Corrections : Other minor corrections. Feb-18-26: Improvements : 🆕Several improvements to the home screen. Among them, better definition for the preview image. Corrections : Other minor corrections. Feb-16-26: Improvements : 🆕The interface help and initial window have been updated. The Text Properties window now includes the ability to add a specific value to existing text angles. For example, entering +180 degrees in the Angle field will rotate the text 180 degrees from the existing angle. Angles without the + symbol will cause the text to be adjusted to the entered angle. 🆕Now, if you edit the text of a leader, and change the angle of the text, the leader's line assumes the angle of the text. The active page is now displayed in the title of the Configure Page and Units window. Corrections : The Properties command for text was unnecessarily changing the paragraph width. The initial window allowed access to the drawing window menus. I could create a condition that would freeze the program. Other minor corrections. Feb-13-26: Improvements : 🆕The edtxtelev command was added to the grading menu/area. The following aid programs have been updated: The bpoly command. The new edtxtelev command. Export to DXF or DWG (which happens when there are multiple layouts). The window for creating blocks. The text styles window. Use of the pages (Layouts). Spanish translation added to the create blocks window. Corrections : When opening the Point Control and/or Surface Control windows, the drawing could not be edited. Other minor corrections. Feb-12-26: Improvements : 🆕 To improve file organization, the program now automatically creates the following folders in the same location as the edited or created drawing: Recovery and Preview. The Recovery folder stores backup files and previous versions converted with the built-in converter. The Preview folder stores the preview files created for each drawing. Both folders and their contents can be deleted without affecting the drawings, except that the files will no longer be available. Corrections : Other minor corrections. Feb-11-26: Improvements : 🆕The DXF and DWG export command now exports a file for each layout when the drawing contains multiple layouts (pages). Corrections : Blocks that had been erased were still printing. Other minor corrections. Feb-10-26: Improvements : 🆕The join command in the polyline editing area can now add a spline to the polyline. Corrections : Additional viewports were not printing when the viewport's center of focus was outside the main view. If, when using the point manager, you try to add a point using the upper portion of the point manager window, the point will not be added. Other minor corrections. Feb-6-26: Improvements : When you copy/paste the drawing more than once, the same paste is repeated. It has no effect. Corrections : Other minor corrections. Feb-5-26: Improvements : To mitigate the problem with certain (persistent) keyboard configurations that double-enter the minute and second symbols in bearings, the ability to accept the bearing as follows has been added: S45d25M33FE. That is, a bearing of S45d25'33"E can now also be entered as: S45d25M33FE 🆕When creating a block, you now have the option to replace the selected entities with a block. Confirmation was added before applying the text style reset. The option to force the parameters of a text style to all existing texts that have the selected style assigned was added. Corrections : Other minor corrections. Feb-3-26: Improvements : When creating a polyline measurement table, it was added that it asks for authorization to change the polyline to the specified layer. 🆕The `edtxtelev` command has been added. This new command is for editing text representing elevations in a grading system. It opens a window with options to add, subtract, multiply, or divide based on an entered value. The calculated elevation is then applied to each selected text containing a written elevation. Currently, it can only be executed by typing `edtxtelev` on the keyboard. Corrections : After adding or removing a page (Layout), if you undoed, the drawing could become corrupted. Renaming the active layer triggered an error message. Protection was added to prevent this operation. When manually creating a triangle on the TIN, it was possible to click on the same point more than once, thus creating an invalid triangle. Protection was added to prevent this. Other minor corrections. Jan-31-26: Improvements : Osnaps Endpoint now works over the section lines in the floor plan. Osnaps Perp now works on table frames. Corrections : Command to manually create a triangle on the TIN, now filters the search for points and uses that data as a priority. When trying to open a corrupted drawing, it now displays information about why the drawing cannot be opened. When trying to import a LandXml file that does not contain points, now, instead of simply displaying an error, it shows information about why the file cannot be imported. Other minor corrections. Jan-29-26: Improvements : None. Corrections : Converting drawings with a hatch that did not have lines caused the drawing to not be converted. The section of land with a parking value less than 1 could crash the program. Security was added to block values less than 1. Other minor corrections. Jan-27-26: Improvements : 🆕A new tab system has been added for layouts (pages). This system makes manipulating layouts more familiar. The page layout system was refined. Corrections : If a viewport was deleted, when printing the sheet the edge of the deleted viewport would continue to appear in the PDF. Other minor corrections. Jan-24-26: Improvements : When printing, the option to add to the print tag now prints the layout name. When switching from one layout to another, the entities are now updated according to the scale assigned to the layout. Corrections : Other minor corrections. Jan-23-26: Improvements : Create/edit text window - improved handling. Improved page system. Page 1 can now be deleted. Also, when renaming a page, for quick access, the name is displayed on the button. Corrections : When importing a DXF file, the text was marked as "No auto-scaling." This caused a problem when creating new text. Now, when importing a DXF file, it automatically adjusts to its default auto-scaling setting. The dot table was sometimes drawn with extra space at the bottom. Problem printing if the viewport scale is different from 1 Other minor corrections. Jan-22-26: Improvements : None. Corrections : When importing the points, the option to use descriptions as the layer name, and the option to use the layer from the file, had been disabled. Other minor corrections. Jan-13-26: Improvements : None. Corrections : The part about discovering the ODA converter folder, I wasn't finding the Program Files folder when Windows is in Spanish. Other minor corrections. Jan-09-26: Improvements : None. Corrections : Minor corrections to the DXF system for exporting point layers. Other minor corrections. Jan-08-25: Improvements : None. Corrections : When exporting DWG files, if the ODA converter wasn't installed, the program would report it, but it wouldn't be visible. Now, a window appears with instructions and download options. Other minor corrections. Jan-06-26: Improvements : None. Corrections : When scaling the size of an arc, if its initial coordinates were equal to its final coordinates, even if the specified angle was less than 360, it was printed as a circle. Now, the specified angle is respected. Other minor corrections. Jan-02-26: Improvements : None. Corrections : When opening a drawing from version 10.3, if that drawing contains a surface without contours , the drawing could not be converted to the latest version. Other minor corrections. Dec-29-25: Improvements : Hatch: documentation included Corrections : The way points are sent to the CAD was adjusted so that the text style can be controlled. When I double-clicked on a point, I was not opening the point editor. Other minor corrections. Nov-25-25: Improvements : Hatch: You can now specify a line type and its scale. You can now choose a predefined hatch from a list. This area is functional, and although it's a bit basic, it will be improved later. Documentation is missing. The bpoly command was documented. Corrections : Other minor corrections. Nov-14-25: Improvements : 🆕New bpoly command. To use it, simply type bpoly and press Enter. Then click inside an area, and this will create a polyline of the perimeter. The option to click within an area to draw the pattern or hatch was added to the hatch command. Corrections : The intersection osnap on polylines was improved. Other minor corrections. Nov-13-25: Improvements : The new bpoly command, in its initial stage, can already work on simple shapes. To use it, simply type bpoly and press Enter. Then click inside an area, and this will create a polyline of the perimeter. Corrections : Some problems related to opening documents were fixed. Other minor corrections. Nov-04-25: Improvements : None. Corrections : Sometimes, the Send to drawing button would hide when another message took its place. Other minor corrections. Nov-03-25: Improvements : None. Corrections : More fine-tuning for the trim command. It was failing under some conditions related to polylines. Other minor corrections. Oct-29-25: Improvements : None. Corrections : The trim command was failing under some conditions related to polylines/polylines and polylines/dimensions. Other minor corrections. Oct-25-25: Improvements : The reset button in the dimension styles settings window now returns the dimension text to its original position. Corrections : RD style survey table, was not showing the arc data. The converter could not convert version 6.0 files Other minor corrections. Oct-22-25: Improvements : None. Corrections : The "cf" "cfence" selection mode was selecting entities outside the indicated area. The option to select "cf" or "cfence" was not working in the triangulation process. This option is similar to the "cp" option in AutoCAD. Other minor corrections. Oct-13-25: Improvements : The ability to select points by indicating a list of numbers was added. Nodes can now be used as a data source to create the surface. For example: nodes created when importing a LiDAR point cloud. Corrections : If you specified to create a surface and only selected nodes are present, an error occurs. Other minor corrections. Oct-8-25: Improvements : Corrections : If the converter was not present when importing a DWG file, an error occurred. Other minor corrections. Oct-5-25: Improvements : The ODA converter is now detected regardless of the version. Previously, if the version had been upgraded to a different number, a message would appear indicating that the ODA was not present. Progress indication was added to the autopoint command. Corrections : Other minor corrections. Sep-19-25: Improvements : The autopoint command was given the option to specify the point type. Corrections : Other minor corrections. Sep-18-25: Improvements : 🆕The ability to import LiDAR clouds generated on the NOAA website in USGS format has been added. The link is: https://coast.noaa.gov/dataviewer/#/lidar/search/ Instructions : Zoom in on the area Click on Draw and draw a rectangle over the desired area Click on the shopping cart icon in the map list and choose the desired data type. Tip: The second option contains LiDAR points from 2018. Click on the shopping cart at the top right where the selected maps are located. Click on Next (bottom right) Set the vertical units to meters. Adjust Output Product: Point Set the Output Format: Points ASCII X,Y,Z, pts Adjustment Data Classes: Ground Click on Next (bottom right) Fill in the information where the email should be sent Follow the on-screen instructions. An email will arrive with the files packaged in a ZIP archive. Corrections : Other minor corrections. Sep-07-25: Improvements : 🆕A button has been added to the tables window to export the data to Excel. The documentation was updated. Corrections : The offset command for ellipses has been improved. Other minor corrections. Aug-22-25: Improvements : A button was added to the home window to facilitate activation. The documentation was updated. Corrections : Other minor corrections. Aug-19-25: Improvements : 🆕Compatibility with IntelliCAD 14.0 PE CMS Corrections : Other minor corrections. Aug-15-25: Improvements : 🆕When importing a DXF, layers are now created with the original thickness. Corrections : When extending a dimension against a line, if the line does not intersect, an endless loop is created that blocks the program. Editing the position of a dimension sometimes causes it to become distorted. When importing DXF: Some text styles were not being created. If this contains inserted blocks, and within these, there is an invisible attribute, the position of this attribute affected the zoom extent and the automatic page adjustment. Updated manual. Other minor corrections. Aug-13-25: Improvements : A special filter was added to detect duplicate stations. When detected, the program offers the option to remove all duplicate points. Corrections : The program is flagged if there are many duplicate points. When using osnap on entities in a LOCK layer, osnap failed. Other minor corrections. Aug-05-25: Improvements : An option was added to the image window so that the image in the paper space can be on top of the other entities. Corrections : The command to create parallel areas, under certain conditions, created an area smaller than expected. Other minor corrections. Jul-18-25: Improvements : 🆕Now you can trim the dimensions. 🆕The use of the Extend command in dimensions has been refined. You can now specify a thickness for the entities: Polygon and Rectangle (with their variants) Corrections : Other minor corrections. Jul-17-25: Improvements : 🆕Creating Polylines: You can now undo to the first point. Now, when inserting periods, the numbers are turned on by default. The trim command for polylines has been improved Corrections : Creating Polyline: The first section did not accept undo. When the polyline ran in a CW direction, the centroid was generated very far away. The new method of sending data has been refined; now the points are more similar to the originals. Other minor corrections. Jul-16-25: Improvements : DocViewer now remembers the last open document. If you close the window, reopening it will display that document. 🆕 When invoking Mr.CAD 360 from an external CAD system, sending data to the CAD system now uses a DXF file, which increases data delivery speed by 75%. An option was added to the options window to control the method of sending data to the external CAD system. Corrections : Break Command was not showing the osnap. The DocViewer panel closed when undoing. When performing trim or extend, the affected entities did not respond to undo/redo. The Rotate command was not rotating with reference to the object's current angle. Other minor corrections. Jul-11-25: Improvements : Now, when importing a DXF file, unused elements are automatically removed from the drawing. This results in a clean drawing free of unnecessary elements. Corrections : When sending paragraph text to AutoCAD or CMS IntelliCAD, it was produced with double spacing. Entering distances with thousands separators in commas caused the number to not be read correctly. If there was a drawing open and the user indicated to make a new one, then, when on the initial screen, and trying to open a DXF, a question appeared asking to save the drawing when it was not necessary. Other minor corrections. Jul-10-25: Improvements : Now the volume report includes the time and name of the included surfaces. Updated manual - Volume calculation. Corrections : Other minor corrections. Jul-09-25: Improvements : Corrections : A problem was fixed that caused an error to be displayed when creating sections with the area calculation option enabled. A problem was fixed that caused the program to freeze when trying to create a new drawing after the program was closed in the start window, and then that action was canceled. Other minor corrections. Jul-07-25: Improvements : The ability to control text wipeout based on the text style has been added. You can now assign a text style the ability to clear the background of the text box (wipeout). Therefore, all text with that style assigned will maintain a clear background. Corrections : Other minor corrections. Jul-02-25: Improvements : In angular dimensions, now when editing the text position, the text angle is adjusted to 90 degrees relative to the center. Corrections : Problem editing grips with aligned dimensions: the dimension was positioned incorrectly. When adding survey points, the first point went into the correct layer, the others were added into the wrong layer. Other minor corrections. Jul-01-25: Improvements : Updated manual. A button to print the current settings was added to the settings window. Command for volume calculation: The message indicating that Depth 0 had been found... has been removed. This message was confusing, as it was phrased as if it were an error. Now it simply highlights the drill bit in yellow. The yellow drill bits no longer contain the depth label. Corrections : The regeneration of points with the traverse activated was reviewed. Under certain conditions, it could fail and block the drawing. The command to adjust the point sequence was reviewed. In some cases, it was not completing the execution. Other minor corrections. Jun-11-25 Improvements : Command for calculating earthwork volume, improved reports. With options to display only points, borehole marks, and marks accompanied by depth. Earthwork data can now be exported to DXF and DWG formats. Previously, it could only be exported directly to the drawing. Corrections : Some details regarding exporting to DXF. Other minor corrections. Jun-6-25 Improvements : Updated manual. The ability to copy a list of commands and paste them into the program's screen for execution had been added. Now, the ability to process data referenced to a point has been added. Example of a command list where new points are referenced to the first. The following list creates a series of nodes referenced to the coordinate 464.1201,699.0502 NODE 464.1201,699.0502 ^143.367<19.50.45 ^139.418<34.47.42 ^144.662<48.56.15 ^154.981<47.24.11 Corrections : Other minor corrections. Jun-4-25 Improvements : New command to convert elevations that have been inserted in text to points Corrections : When importing a DXF or DWG file, if it contains blocks inserted in the drawing that are not visible on screen, this created a problem for centering the page. Other minor corrections. Jun-2-25 Improvements : None Corrections : A problem with text justification that prevented DXF files from being imported into AutoCAD or IntelliCAD was resolved. Other minor corrections. May 28, 2025 Improvements : None Corrections : Some messages reviewed. Other minor corrections. May 21-25 Improvements : None Corrections : When printing a block drawing with attributes, if the attributes have no assigned value, many blank entries were created, which could cause the PDF to be unreadable in other programs. When printing a table with a closing report, it was not printing the data. When exploding a table with a closure report, the process was interrupted and the table was not fully exploded. Measurement tables in RD style were skipping coordinates. Other minor corrections. May 16, 25 Improvements : Updated manual. Now you can copy a list of commands and paste them into the program's screen, and they will be executed. Example command list: pline 100,100 @12.996 @13.103 @34.132 @20.302 @43.909 @46.932 @33.525 @113.099 @48.907 c The system for applying copyright to drawings was revised to improve its effectiveness. Corrections : Other minor corrections. May 13, 2025 Improvements : The mirror command now asks if you want to keep the original entities. Corrections : When a point is added to an existing drawing, it was using the number 1 as a base. But if it already existed, and this was a station, this affected the list of existing stations to be referenced. When rotating an entity in DMS format (-0d25'23") with the angle in negative, I was rotating it in the positive direction. I wasn't taking into account that the angle is negative. Other minor corrections. Apr-24-25 Improvements : Updated manual. Corrections : Spelling of some words. Other minor corrections. Apr-23-25 Improvements : Updated manual. Corrections : Other minor corrections. Apr-15-25 Improvements : A button was added to the styles window to reset all text styles to their factory values. New command Flat . This is used to set the entire drawing to elevation (z) = 0.00 New command txtfind . This is used to search for specific text throughout the drawing. Corrections : Spanish translation of some menu items. When applying a command in 3D view, the cursor would stop showing. Other minor corrections. Apr-9-25 Improvements : None. Corrections : When adding entities with a value of the Elev variable other than 0, those entities were not shown in the drawings. Other minor corrections. Apr-3-25 Improvements : The documentation was updated. Corrections : When invoking the command for Text Properties, an error was displayed and then the window opened. In the Units window, when the option to not show commas was turned on, the list of decimal places was not being shown in the dimensions settings window. The dimensions window was not showing the default decimal precision. The Temp folder was filling up with temporary worker PDFs. When printing polylines with fill enabled, if black and white printing was specified, the fills were not visible in the PDF. The option to print in shades of gray was added. Other minor corrections. Mar-31-25 Improvements : The new GISmap command was documented. The ability to save the last georeference used in GISmap was added. The documentation was updated. Corrections : Area conversion adjustment for the Dominican Republic: Tasks Other minor corrections. Mar-28-25 Improvements : The new DocView command was added to the Ribbons. The ability to export surfaces in a LandXML file was added. New options were added to create contours, to add level dimensions (elevations) to contours with full elevations and intermediate elevations. The documentation has been updated. Corrections : On low-resolution monitors, in the surface control panel, when scrolling the panel contents to access the controls at the bottom of the window, a button at the top would not scroll. After clicking Next (in the pop-up menu) the prompt disappeared. Other minor corrections. Mar-23-25 Improvements : Georeference codes for the country of Panama were added to GISmap. Corrections : Other minor corrections. Mar-13-25 Improvements : The ability to report additional errors in the display of the drawing on the screen was added. Corrections : Automatic elevation calculation in side-firing was not calculating the elevation correctly, as it was using the wrong station as a base. Other minor corrections. Feb-26-25 Improvements : A splash screen was added to the GIS Map to report the connection progress at startup. Corrections : Alternate dimensions in architectural units, when the dimension was a round value such as 25'-0", it was being indicated as 24'-12" When entering a distance in feet and inches such as 5'3-3/4", it was being read as 5'33/4". Other minor corrections. Feb-20-25 Improvements : Protection was added to prevent the active layer from freezing. Corrections : The button to save layer templates, located in the Layers Manager window, was not working. Other minor corrections. Feb-13-25 Improvements : The symbol library for Architecture, the file list was reorganized to make room for openings such as doors and windows. Corrections : Other minor corrections. Feb-4-25 Improvements : None. Corrections : When editing any type of item, the description used to automatically change to match the item type. Now it remains unchanged unless the user makes the change. Other minor corrections. Jan-31-25 Improvements : None. Corrections : When editing a Station, the description was overwritten by the automatic value, and there were problems with the BS. In some cases, this resulted in an indefinite search. When importing points from a file, the backsides were being adjusted to the number of the first station. Now, by default, they are adjusted to North. If the user changed their mind and canceled the operation when closing the program, the screen would not regenerate correctly. Other minor corrections. Jan-30-25 Improvements : None. Corrections : If the program was minimized when closed, and the option to open maximized was turned off, it would not open the screen when started again. Undo/Redo after exploding a surface did not work correctly. AutoSave: better calibrated in time. After using zoom commands, the variable inaction = true remains and that prevents AutoSave. It is now performed, even though the file already has a name. Now it is only performed in the specified AutoSave folder and not in the drawing folder. Other minor corrections. Jan-21-25 Improvements : None. Corrections : When selecting from the list by double-clicking, when there is more than one overlapping entity, the selection method was changed to window, and it did not allow selection from the list. When drawing a polyline with the cursor at an angle other than 0, I was not drawing with the correct distance. If, when dimensioning, the cursor was aligned at an angle other than 0, the dimension could not be done correctly. When saving in DWG format, if the file already exists and is going to be replaced, it produced an error. There was a bug that, when exiting the program, if the drawing wasn't saved and you canceled the exit, you would lose access to the cursor. Other minor corrections. Jan-16-25 Improvements : It was added to the GIS Map: Using the arrow tool, you can double-click on the map and it will display the coordinates in a pop-up window. Improved process verification. It now checks for internet connection and other issues to prevent certain errors when starting the map. Mr.CAD 360 / gisexport command now opens the map, even if nothing is selected. Corrections : There was a bug that would crash the program if you tried to add a station with the number of an existing station. Other minor corrections. Jan-14-25 Improvements : It was added to the GIS Map: A button to create a snapshot (image) of the current zoom level. This can be pasted into any other program. The option to display the areas of closed polygons. The ability to paste images from any other program was added to the program when doing a copy/paste. Corrections : Other minor corrections. Jan-9-25 Improvements : None. Corrections : Several internal matters related to the GIS Map. Other minor corrections. Jan-8-25 Improvements : The options window that appeared when importing DWG or DXF files was removed. These options were added to the general options window, in the Import area. A confirmation window was added when closing the program. Corrections : A problem in the configuration saving process was fixed. This affected other commands. Other minor corrections. Jan-5-25 Improvements : None. Corrections : When editing an orphan table (one that had been separated from the polyline), an error occurred. Other minor corrections. Jan-3-25 Improvements : A Pan button was added to the GIS Map. Corrections : IMPORTANT : A control that was not included in the installation package. The absence of this control affected the Layers window. This only affected Windows systems that did not have this control installed. This control is now included in the package and is only installed if it is missing from the system or if the existing control is older than the one included in the package. Other minor corrections. Jan-2-25 Improvements : Ejemplo de lote desplegado en el GIS Map de Mr.CAD 360. Este fue creado en las coordenadas NAD83. 🆕New gisexport command - Beta release. An example has been added to the sample drawings folder for testing. A free controller available online is required. If the controller is not installed, instructions will appear when you try to use the command. The controller is necessary as it enables access to the map. Once the controller is installed, the command execution would be: type the following in the command: gisexport Select the properties (closed polylines) to be exported to the map The properties are shown on the map. The ability to save in Shapefile (shp) format has been added. This option allows you to export polygons for viewing in Google Earth or any other GIS program compatible with this format. Corrections : The ODA converter for DWG files changed its version, and the directory where it's installed also changed. Therefore, even after installing the latest version, the converter wasn't working. Tera Term also changed its version and the name of its installation directory. Therefore, even if the latest version was installed, Tera Term did not work. Blocks with mirror had a ghost dot on the opposite side of the mirror, which was included when making a selection. Other minor corrections To view previous updates, you can visit: Mr.CAD 360 Updates - 2024 If you'd like to try Mr.CAD 360 yourself, the following link is for a free limited license: https://mrcad.cloud/_update/mrcad360-eva/mrcad360.eva.setup_10.exe If you are a user of a previous version of Mr.CAD Professional and wish to benefit from the advantages of Mr.CAD 360 in the new version of Mr.CAD Professional, the following link is for you:

CHANGE LIST: 🆕 = Featured IMPORTANT : These improvements and/or fixes can only be obtained through the automatic update system . Grades: This directly affects IntelliCAD CMS : If the open drawing is in very large coordinates, this can cause errors due to limitations in the "Get Intersections" command provided by IntelliCAD. It is recommended to move the project to smaller coordinates. Affected commands: All those related to obtaining surface data. When drawing lines with the geometry by list command, if you choose to type the layer name on the keyboard, it does not draw the line. Sep-8-26 Improvements : Mr.CAD 360 - Updated.See the list of improvements by clicking this link. Corrections : None. Sep-2-26 Improvements : Mr.CAD 360 - Updated.See the list of improvements by clicking this link. Block library updated for compatibility. New 36"x48" pavilion Corrections : Other minor corrections. Aug-27-26 Improvements : Mr.CAD 360 - Updated.See the list of improvements by clicking this link. Integration with the new CMS IntelliCAD 15.0 Corrections : Other minor corrections. Aug-26-26 Improvements : Mr.CAD 360 - Updated.See the list of improvements by clicking this link. Since there were countless blocks in the AutoCAD 2000 library, these drawings were updated to AutoCAD 2004. They are now compatible with scaling using the IntelliCAD CMS properties window. This change means the program cannot be used with any version of AutoCAD older than 2004, such as version 2000. Corrections : Other minor corrections. Jul-28-26 Improvements : Mr.CAD 360 - Updated.See the list of improvements by clicking this link. The notebook data entry command did not want to print the report. Corrections : Other minor corrections. Jul-01-26 Improvements : Mr.CAD 360 - Updated.See the list of improvements by clicking this link. Corrections : Other minor corrections. Jun-03-26 Improvements : A button to display the current scale in the drawing was added to the bottom edge of the Mr.CAD Tools floating bar. Mr.CAD 360 - Updated.See the list of improvements by clicking this link. Corrections : Other minor corrections. May 26, 2026 Improvements : Mr.CAD 360 - Updated.See the list of improvements by clicking this link. Corrections : The surface scan command was not working properly in CMS IntelliCAD. The GVOL command was failing when preparing the volume calculation in CMS IntelliCAD. Other minor corrections. May-07-26 Improvements : Mr.CAD 360 - Updated.See the list of improvements by clicking this link. The GVOL command was restored to the Mr.CAD Professional floating tools Corrections : When editing the text style of the measurement table title in the settings program, the width was not being applied. Other minor corrections. Apr-27-26 Improvements : Mr.CAD 360 - Updated.See the list of improvements by clicking this link. It was integrated into the IntelliCAD CMS > grading area, the ability to indicate the slope in proportions 1:2 etc. Improved installation process. Corrections : Other minor corrections. Apr-23-26 Improvements : Mr.CAD 360 - Updated.See the list of improvements by clicking this link. Updated documentation: IntelliCAD CMS configuration. How to change the stitch type. Corrections : The scale report has been removed from the bottom bar of CMS IntelliCAD. Due to a bug in the program, it would stop working after opening and closing a couple of drawings. The following layers were added: Stations, Bench Mark and LotPoints to improve compatibility with Mr.CAD 360. The command: Contour Stamp now inserts the elevation tag into the correct layer . Other minor corrections. Apr-14-26 Improvements : Mr.CAD 360 - Updated.See the list of improvements by clicking this link. Corrections : The command to insert elevations for grading on a vertical curve was not working in CMS IntelliCAD. Other minor corrections. Mar-14-26 Improvements : Many improvements have been made to Mr.CAD 360 - Updated.See the list of improvements by clicking on this link. Corrections : Now, when importing points with Mr.CAD 360, if a point number (ID) is greater than 2147483647, it is automatically changed to 0. There cannot be point numbers greater than 2147483647. Other minor corrections. Mar-12-26 Improvements : Many improvements have been made to Mr.CAD 360 - Updated.See the list of improvements by clicking on this link. Corrections : Importing a point file with Mr.CAD 360, which contains the layer, caused an error. Other minor corrections. Mar-06-26 Improvements : Many improvements have been made to Mr.CAD 360 - Updated.See the list of improvements by clicking on this link. Corrections : The commands to insert text from pre-created listings were not working. Other minor corrections. Jan-27-26 Improvements : Many improvements have been made to Mr.CAD 360 - Updated.See the list of improvements by clicking on this link. Corrections : The 2Da3DPOLY command was not working correctly, especially when triangles were present. Other minor corrections. Jan-24-26 Improvements : Many improvements have been made to Mr.CAD 360 - Updated.See the list of improvements by clicking on this link. Corrections : Other minor corrections. Jan-22-26 Improvements : None. Corrections : Applying the Isolate Layer command as a group to a point was turning off the layer of the point's nodes. Therefore, further adjustments were made to the point layers. Other minor corrections. Jan-14-26 Improvements : None. Corrections : Further adjustments to the point layers. When trying to create the measurement table, an error related to the layers occurred. When attempting to rotate the points using the platform tools, the error message "Malformed list" appeared and the command was cancelled. Other minor corrections. Jan-09-26 Improvements : Many improvements have been made to Mr.CAD 360 - Updated.See the list of improvements by clicking on this link. Corrections : Further adjustments to the point layers. Especially the layers for number, elevation, and description. Other minor corrections. Dec-30-25 Improvements : Many improvements have been made to Mr.CAD 360 - Updated.See the list of improvements by clicking on this link. Corrections : The layer system for the commands was updated Quick import: Q-import. Manual data entry: Survey Other minor corrections. Dec-29-25 Improvements : Many improvements have been made to Mr.CAD 360 - Updated.See the list of improvements by clicking on this link. Corrections : A problem that prevented points imported with the 360 from having their text style adjusted was resolved. Other minor corrections. Nov-13-25 Improvements : Many improvements have been made to Mr.CAD 360 - Updated.See the list of improvements by clicking on this link. Corrections : When drawing lines with the geometry by list command, if you choose to type the layer name on the keyboard, it does not create the line. Other minor corrections. Nov-04-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : The attexplode (attribute explode) command was not working. Other minor corrections. Oct-25-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. Aug-26-25 Improvements : The Activation button icon in Mr.CAD Loader was changed for better distinction. The LINE-DIAG command was updated to work the same as the PLOT-LINE command (the command to create lines with auto-dimension, in bearings). The documentation was updated. Mr.CAD 360 - Updated.See the list of improvements. Corrections : A message about an error in layers that appeared when creating a measurement table was removed. Other minor corrections. Aug-22-25 Improvements : A button was added to the Mr.CAD Loader to make activation easier. The documentation was updated. Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. Aug-19-25 Improvements : Compatibility with IntelliCAD 14.0 PE CMS Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. Aug-15-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : If, when configuring the drawing, it did not have a viewport, the configuration would stop. Other minor corrections. Aug-13-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : The command to create lines with auto dimension, in bearings, is canceled in the second round. Other minor corrections. Aug-06-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : The command to turn the data points on and off stopped working with the change to the new way of importing points from the 360. Other minor corrections. Jul-16-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. 🆕Importing points using Mr.CAD 360 is now super fast. The method has been changed to import using a DXF file. 🆕In CMS intelliCAD 11.1 PE, a window is now displayed to choose whether the user wants to use the traditional menus (Toolbars) or the new Mr.CAD Tools floating toolbar. In CMS intelliCAD 11.1 PE, you can now use the DVTOOLBARS command. This command allows you to switch between the Toolbars and the Mr.CAD Tools floating toolbar. Corrections : Other minor corrections. Jul-11-25 Improvements : Updated help - Volume calculation. Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. Jul-09-25 Improvements : Updated help. 🆕In CMS intelliCAD 13.1 PE, you can now use the DVTOOLBARS command. This command allows you to switch between the Toolbars and the Mr.CAD Tools floating toolbar. Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. Jul-07-25 Improvements : In CMS intelliCAD 13.1 PE, a window is now displayed to choose whether the user wants to use the traditional menus (Toolbars) or the new Mr.CAD Tools floating toolbar. Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. Jul-02-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. Jun-11-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Improved earthmoving commands. Corrections : Other minor corrections. Jun-6-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Updated menu. Simplified earthmoving command area. Corrections : The earthwork calculation command was simplified to the earthwork performed with Mr.CAD 360. This is much faster and more accurate. Other minor corrections. Jun-4-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. Jun-2-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : CMS IntelliCAD - When converting text elevations to elevation points, if the selection exceeded 500 entities, the command was canceled and the program refused to continue with any other command. CMS IntelliCAD - When calculating volume, if the selection exceeded 500 entities, the command was canceled and the program would not continue with any other command. Other minor corrections. May 28, 2025 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : CMS IntelliCAD - Fixed an issue that caused the create profiles command to not work. Other minor corrections. May 13, 2025 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : CMS IntelliCAD - Cross sections are canceled if the value of the SELECTIONCYCLING variable is different from 1. Other minor corrections. Apr-24-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : Spelling of some words. Other minor corrections. Apr-23-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. Apr-17-25 Improvements : Compatibility with AutoCAD 2026. Corrections : Other minor corrections. Apr-15-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Measurement table in IntelliCAD: Under some conditions, existing points on the perimeter were not being detected. Corrections : Other minor corrections. Apr-9-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Commands related to area converted to Ropes and Tasks were not working properly in some versions of CMS IntelliCAD PE Corrections : Other minor corrections. Apr-3-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. The documentation was updated. The horizontal lines that divide each data field in the tables are now on a separate layer. This allows you to turn off that layer if you don't want to print those lines. Corrections : Other minor corrections. Mar-31-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : Area conversion adjustment for the Dominican Republic: Tasks Other minor corrections. Mar-24-25 Improvements : None. Corrections : External commands stopped working. Other minor corrections. Mar-21-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. An option was added to Mr.CAD Tools to control which tools open when the cursor hovers over the icon. Corrections : When trying to close the IntelliCAD PE CMS when there were no drawings open, it caused the program to not close. When creating the measurement table, if there were two points very close to each other, the point was repeated in the table. Other minor corrections. Mar-13-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. Feb-27-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. The command to calculate volume using Mr.CAD 360 was added to the IntelliCAD PE CMS menu. Corrections : Other minor corrections. Feb-4-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : The abbreviation command in CMSIntelliCAD 13.1 was not working. Other minor corrections. Jan-31-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : Several commands in CMSIntelliCAD 13.1 were not working. Other minor corrections. Jan-21-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. Jan-14-25 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Mr.CAD Updater now asks before downloading and before installing. Corrections : Other minor corrections. Jan-10-25 Corrections : Mr.CAD Loader stopped working. The only button that worked was the one to close the program. The problem was caused by the image. Note : If you don't use Mr.CAD Loader, don't worry about this update. Other minor corrections. Jan-9-25 Improvements : Corrections : IMPORTANT : Mr.CAD 360 - Updated.See the list of fixes. There was a change in Microsoft's antivirus software that affected the execution of Mr.CAD Loader, causing it to stop working. If you installed the previous version ( 10.10.108.214) , to allow Mr.CAD Updater to access the new update, you can open a drawing by double-clicking on it. Alternatively, you can open Mr.CAD 360 Combo. This should load Mr.CAD Updater, and it should then begin downloading the update with the fixes. Other minor corrections. Jan-8-25 Improvements : IMPORTANT : Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. Dec-27-24 Improvements : IMPORTANT : If you use 360 for your work, it's important that you update Mr.CAD 360.See the list of improvements . Corrections : Other minor corrections. Dec-21-24 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : In some versions of AutoCAD, Mr.CAD tools was not loading automatically. Other minor corrections. Oct-17-24 Improvements : Corrections : A problem was solved when creating windows on the floor plan; when there were more than one (3), they were created incorrectly, and the identification tag was in the wrong layer. Other minor corrections. Oct-16-24 Improvements : 🆕Everything that was missing from the architecture was integrated into the IntelliCAD CMS. Corrections : When inserting the points, in the point list window, when editing the point group, the box for the adjustment value in the XYZ was not accepting decimal values. A conflicting setting in the text height configuration for dimensions was resolved. This setting was repeated in both the general settings and the text styles settings, causing a conflict. It was removed from the dimensions area and placed within the text styles settings. Other minor corrections. Oct-14-24 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. Oct-12-24 Improvements : The following symbols were added: Electricity Lamps Communication systems Toilets Many more need to be added, and that's what we're working on. Corrections : Many internal fixes for compatibility with the IntelliCAD CMS. Related to Architecture. Other minor corrections. Oct-10-24 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : In the last update, some files were left out and some things didn't work. The windows in elevation were not drawing completely. The menu was not updating. Other minor corrections. Oct-03-24 Improvements : IntelliCAD CMS: 🆕Part of the architecture is working. The symbols for doors and windows in elevation were added. Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. Sep-03-24 Improvements : 🆕Compatibility with the new CMS IntelliCAD 13.0 (BETA) General settings : Now suggests updating styles or layers only if changes have been made to those settings. Corrections : General settings: It displayed an error before applying the changes. Other minor corrections. Sep-01-24 Corrections : IntelliCAD CMS: Dimensions toolbar: Some functions were not working. Mr.CAD Loader with CMS IntelliCAD: By using the Configure IntelliCAD option, the menus are now recompiled so that the latest version can be used. Other minor corrections. Aug-17-24 Corrections : IntelliCAD CMS: Point Manager : When editing the point numbering, it was not processed correctly. Other minor corrections. Aug-16-24 Corrections : IntelliCAD CMS: The following were not working: The command to stamp the curve data, and the command to make the arc table. Profiles : Horizontal and vertical scales had a decimal point. This was removed. QIMPORT : If, when importing points, the user requests to see the list, the points are inserted with several 000s in the point number. For example, 0001, 0002, 0003, etc. QIMPORT/Point Manager : When removing points from the list, it was not processed correctly. Other minor corrections. Aug-12-24 Corrections : IntelliCAD CMS: The recent changes affected the command to create the survey table. Thanks to those who submitted reports, it's now fixed with this update. Other minor corrections. Aug-08-24 Improvements : CMS IntelliCAD PE+ 12.1x64: 🆕You can now create: Cross-sections 🆕You can now label stations in a polyline and create the vertex table. Mr.CAD 360 - Updated.See the list of improvements. Corrections : IntelliCAD CMS: The commands to switch UCS and create and restore views were not working correctly. This fix activates several commands that were previously not working. Among those that now work are the commands to create cross-sections and the commands for stationing and vertex tables of a polyline. Other minor corrections. Aug-08-24 Improvements : Mr.CAD 360 - Updated.See the list of improvements. The help manual and the License Agreement have been updated. Corrections : IntelliCAD CMS: A problem that prevented adding a parked position to a polyline Other minor corrections. Aug-30-24 Improvements : Support for cross-cutting issues has been improved. Mr.CAD 360 - Updated.See the list of improvements. Corrections : IntelliCAD CMS: When using the survey table, if there was no existing point at a vertex, it was always inserting point #1. Other minor corrections. July 24, 2024 Improvements : Mr.CAD 360 - Updated.See the list of improvements. June 10, 2024 Improvements : 🆕CMS IntelliCAD: The missing annotation area and the Tags area have been enabled. Mr.CAD 360 - Updated.See the list of improvements. Corrections : IntelliCAD CMS: When using the survey table, it was not detecting existing points and was inserting duplicates. Other minor corrections. May 23-24 Improvements : 🆕Line table: The option to create a line table has been added to the create tables command. This option reports the total length of the route at the end (instead of the area). Mr.CAD 360 - Updated.See the list of improvements. CMS IntelliCAD: The Annotations and Legends Toolpalette has been added. Corrections : Other minor corrections. May 21-24 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : Other minor corrections. May 16, 2024 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : A bug was introduced that prevented the import of points using MrCAD 360. In CMS IntelliCAD, the button to create pivot areas and parallel areas was invoking the sections command. When configuring the IntelliCAD CMS, IntelliCAD did not close naturally. When configuring the IntelliCAD CMS, the tool palettes remained blank. Other minor corrections. April 27, 2024 Improvements : Mr.CAD 360 - Updated.See the list of improvements. 🆕New dialog box that sums most individual entries. Getting results is now much faster. Now available in CMS IntelliCAD 12.1 Corrections : In field data, when the method used is north-oriented data, when trying to edit a data point, the program did not allow it. Other minor corrections. April 25, 2024 Improvements : Mr.CAD 360 - Updated.See the list of improvements. 🆕 Compatible with AutoCAD 2025 Greater compatibility with the IntelliCAD 12.1 CMS 🆕New dialog box that aggregates most of the individual entries. Now it's much faster to get the results. Updated help. Some icons have been revised. Corrections : When updating Mr.CAD Professional in CMS IntelliCAD, upon first login, the menus are automatically recompiled to display the recent changes. An important fix that affects the use of Mr.CAD 360.See the list of improvements. Other minor corrections. March 27, 2024 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : When importing points using Quick import, it was reactivating the command upon completion. The automatic update system is working. Other minor corrections. March-06-24 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : The excessive and unnecessary amount of window reminders for activation were removed. The automatic update system was not working. Other minor corrections. 02-16-24 Improvements : Mr.CAD 360 - Updated.See the list of improvements. Corrections : The version number was revised so that during installation, it is not reported that the existing version is higher than the one being installed. In some systems where the user has changed the size of the icons and text, the background image that should have been shifted did not look right. Other minor corrections. Feb-08-24 Improvements : 🆕Integration with AutoCAD installations where the executable is autocad.exe Mr.CAD 360 - Updated.See the list of improvements. Improved appearance and description of icons on the Desktop and Windows Menu. The icons for Mr.CAD PRO Loader and Mr.CAD PRO Tools are better identified. Updated installation help. Corrections : Other minor corrections. Feb-07-24 Improvements : 🆕Integration with the new CMS IntelliCAD 12.1 Mr.CAD 360 - Updated.See the list of improvements. Updated help. Corrections : Other minor corrections. Feb-02-24 Improvements : Tool to disable version 9 🆕 New activation system via internet server. 🆕 New automatic update system. Re-compiled executables using the latest technology. 🆕 Connecting to the new IntelliCAD 12.0 CMS Mr.CAD 360 - Updated.See the list of improvements. Updated help. Corrections : Other minor corrections.

Properties Mr.CAD Professional Mr.CAD 360 Program type For AutoCAD® (plug-in) Autonomous CAD License type Conventional* 1 and 3 years Activations 3 3 Interface Language Spanish Spanish / English AutoCAD® Compatibility 2004 or later via: DXF, LSP, or DWG* Compatibility with IntelliCAD® CMS 10.0 or higher via: DXF, LSP, or DWG* Points Manager ✔ ✔ Points table ✔ ✔ (dynamic) Topography ✔ ✔ Surveying ✔ ✔ Subdivision of lots ✔ (pivot and offset) ✔ (pivot, offset, direction, area) Geometric description table ✔ (multiple options) ✔ (Basic) Update tables ✔ ✔ Tools for leveling the ground ✔ (multiple options) ✔ (Basic) Volume calculation ✔ (Borrow pit and cross-sections) ✔ (Borrow pit) Terrain sections ✔ (multiple options) ✔ (Basic) Stormwater Drainage ✔ Sanitary Drainage ✔ ​ Electricity ✔ ​ Notes ✔ (multiple options) ✔ (Basic) Symbol library ✔ (multiple options) ✔ (Basic) Cost of the drawing ​ ✔ * DWG format requires the use of the ODA File Converter program. It's a free download. * See details in the license agreement/section-2 .